Cooling lubricant is used in production and metalworking to reduce friction, to clean the working environment and also provides corrosion protection for the workpiece. Cooling lubricant is the same as metalworking fluid.
Cutting fluid is another term for metalworking fluid or cooling lubricant.
Digestates from a biogas plant are thickened by our evaporator process and can then be spread on fields as concentrated fertiliser. This means: 70% fewer trips due to digestate treatment!
An emulsion is a mixture of two or more, normally immiscible liquids such as oil and water. Emulsions are indispensable in metalworking. Their effect is, however, reduced successively by bacteria and tramp oils. MKR offers you filtering and cleaning systems that can be integrated into your production. This extends significantly the service lives of emulsions and other process media as well as tools.
So-called metalworking fluid is used as a lubricant in production to prevent friction between the tool and workpiece. At the same time, the metalworking fluid also prevents corrosion of the workpiece and, through continuous rinsing of the working environment by means of metalworking fluid, better processing results are achieved. With MKR equipment you can clean the metalworking fluid and reuse it for further production.
Oil is indispensable in everyday operations. Ultrafine particles and other contamination, however, reduce the lubricating effect of oil. Problem solutions and equipment from MKR enable all kinds of process oils to be reclaimed on site.